Maharashtra Board Class 12th Physics Important Objective Question for 2024 – Mock Test 04

महाराष्ट्र बोर्ड इंटरमिजिएट परीक्षा 2024 मध्ये विचारले जाणारे महत्त्वाचे भौतिकशास्त्राचे प्रश्न येथे आहेत, इयत्ता 12वीच्या भौतिकशास्त्राच्या परीक्षेसाठी 39 महत्त्वाचे प्रश्न. जर तुम्ही इंटरमिजिएट परीक्षेला बसत असाल आणि तुमचा विषय भौतिकशास्त्र असेल तर दिलेले सर्व प्रश्न काळजीपूर्वक वाचा.

Maharashtra Board Class 12th Physics Important Objective Question 2024

Results

#1. Coulomb force is :

#2. In a uniform circular motion, the direction of linear velocity is along the

#3. A satellite of the earth is revolving round the earth with a uniform speed ‘v’. If the gravitational force suddenly disappears, the satellite will

#4. For a particle performing UCM, the physical quantities are constant

#5. In a uniform circular motion, the velocity, position vector and angular velocity are

#6. The displacement y in cm is given in terms of time t (s) by the equation y= 3 sin 314t + 4 cos 314t. The amplitude of S.H.M. is

#7. Which of the following is necessary and sufficient condition for S.H.M?

#8. If the length of a simple pendulum is increased by 44%, its time period increases by

#9. A particle executes S.H.M. having time period T. Then the time period with which the potential energy changes is

#10. The displacement of a particle executing S.H.M. is given by y = 0.25 sin 200 t (in cm). The maximum speed of the particle is

#11. A mass M, attached to a spring, oscillates with a period of 2 sec. if the mass is increased by 4 kg, the time period increases by one second. Assuming that Hooke’s law is obeyed, initial mass M was

#12. A particle undergoes simple harmonic motion having time period T. The time taken for displacement to be √3/2th of the amplitude after passing through the mean position is

#13. The work done by the tension in the string of a simple pendulum during half the oscillation is equal to

#14. The displacement of a particle executing SHM is given by x = 0.01 sin 100π (t+0.05). The time period is

#15. A body executes S.H.M. with an amplitude A. what displacement from the mean position is the potential energy of the body is one fourth of its total energy

#16. For a particle executing SHM along x-axis force is given by

#17. A second pendulum is mounted in a rocket. Its period of oscillation will decrease when rocket is:

#18. Two simple pendulums of length 2.5 m and 10 m respectively are given small linear displacement in one direction at the same time. They will be again in same phase at the earliest when the pendulum of shorter length has completed oscillations

#19. The time period of a simple pendulum is 2 seconds. If its length is increased by 3 times, then its period becomes

#20. A simple harmonic oscillator has a period T and energy E. The amplitude of the oscillator is doubled.

#21. A child is sitting on a swing. Its minimum and maximum heights from the ground are 0.75 m and 2 m respectively. Taking g=10m/s2 ,its maximum speed will be

#22. When an oscillator completes 100 oscillations its amplitude reduces to1/3 of its initial value. What will be its amplitude, when it further completes 200 oscillations?

#23. The spring constant of a spring is K. When it is divided into n equal parts, then what is the spring constant of one piece?

#24. A particle doing simple harmonic motion, amplitude = 4 cm, time period = 12 sec. Ratio of time taken by it in going from its mean position to 2 cm and from 2 cm to extreme position is

#25. Steel is ----- elastic as compared to rubber

#26. The perfectly plastic body amongst the following is ---

#27. The ratio of change in volume to original volume is called --

#28. In the equilibrium condition, the deflecting and restoring couples are ----

#29. A beam supported at both ends and loaded at the center is equivalent to --

#30. Bending moment of the beam is --

#31. The external bending moment required to produce a unit radius of curvature is called as ----

#32. Flexural rigidity is equal to --

#33. Searle’s method is convenient to determine the elastic constants of a material in the form of ---

#34. In a bent beam, if the length of the beam is large in comparison with it’s thickness, the shearing stress is ----

#35. The S.I. unit of geometrical moment of inertia Ig is -----

#36. The S.I. unit of flexural rigidity is ---

#37. Within elastic limit, stress is directly proportional to ----

#38. Bulk modulus for a solid is ---

#39. The couple per unit twist in wire is ---

Finish

वर दिलेल्या चाचणी मालिकेतील प्रश्न वेगवेगळ्या वेबसाईटवरून घेतले आहेत, याचे श्रेय त्यांनाच जाते, मी ते फक्त शैक्षणिक हेतूने शेअर करत आहे.

निष्कर्ष

या परीक्षांची पुरेशी तयारी करण्यासाठी विद्यार्थ्यांनी आवश्यक अभ्यासक्रम आणि मागील वर्षाच्या परीक्षेतील प्रश्नांचे पुनरावलोकन केले पाहिजे. कारण परीक्षेची वेळ मर्यादा अत्यंत कठोर असू शकते, वेळेचे व्यवस्थापन महत्त्वाचे आहे.

महाराष्ट्र बोर्डाच्या 12 व्या वर्गाच्या परीक्षांबद्दल अधिक माहिती मिळविण्यासाठी, तुम्हाला परीक्षेचे वेळापत्रक, अभ्यासक्रम आणि परीक्षेची माहिती मिळविण्यासाठी महाराष्ट्र शालेय परीक्षा मंडळाच्या अधिकृत वेबसाइटला भेट देणे आवश्यक आहे. तुम्ही तुमच्या शाळेशी किंवा आध्यात्मिक संस्थेशी संपर्क साधावा. ते तुम्हाला महाराष्ट्र बोर्ड 12वी इयत्तेबद्दल सर्वात विश्वासार्ह आणि अद्ययावत माहिती देऊ शकतात

Leave a Comment